Easy Heat Pipe Heat Cable

Description

Features:

Fixed Resistance, Pre-terminated. For Commercial and Residential Applications

Keeps water flowing at ambient temperatures down to -40 °F (-40 °C)

Cables are rated at 7 Watts per 1 ft (0.30 m)

Built-in thermostat turns on at +38 °F (+3 °C) or below and turns off at +45 °F (+7 °C) and above

Plugs into a standard 120 Vac outlet, must be GFCI protected

Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket

Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in diameter

Pre-assembled and ready to install

Available in 3 ft (0.9 m) increments up to 18 ft (5.5 m) and longer increments up to 80 ft (24.4 m)

Integral thermostat saves energy by powering the cable only when needed

One year limited warranty

Specifications:

CertificationsUL Listed to Canadian Safety Standards and CSA Certified when used in accordance with instructions on water filled metal or plastic pipes

Accessories It is recommended to use EasyHeat HCA application tape or good quality electrical tape with a minimum +176 °F (+80 °C) temperature rating to secure heating cable(s) to pipes. See EasyHeat Pipe Tracing Accessories