Description
Maximum Reach
The Tekton flip socket is both longer and has lower stepped shoulders than competitors to give you maximum reach into lug nut wells.
Thin Walls
The outer diameter is 1mm to 2mm smaller than other Tekton impact sockets, allowing for better access in tight lug nut wells.
Radiused Corners
The radiused corners prevent fastener round-off by applying force to the flat sides of a lug nut, rather than it’s corners.
60° Chamfer
The steep 60° chamfered opening makes it easy for the flip socket to slide over lug nuts.
Extra Deep Wells
Each socket well is extra deep to provide increased engagement with lug nuts and clearance for decorative caps.
Laser & Stamped Markings
The size is marked in two ways on every socket-both as a high-visibility laser marking and a permanent stamped marking.
Sockets Exceed ANSI Torque Standards
Each flip socket size meets a minimum of 1.3 times the ANSI/ASME standard for proof torque (A single-cycle test applies torque until a specified value is reached without failure or permanent deformation).
Drive Tool Retention
The included 3″ extension works for both types of anvils found on 1/2″ drive impact wrenches.
Portable Carrying Case
The high-density polyethylene case withstands common lubricants, fuels and solvents.
High-Performing Steel Alloys
The flip sockets are made from 4140 Chromium-Molybdenum steel
The 3″ extension is made from 6140 Chromium-Vanadium steel
Ideal for Wheel Service
For use with 1/2″ drive impact tools
Requires 3″ extension (included in set)
Flip to change sizes
Specifications
Case Length: 8.4″
Case Width: 5.4″
Case Height: 2.3″
Weight: 3.3 lb
Set Includes
3/”4 x 13/16″
7/8″ x 15/16″
1″ x 1-1/16″
17mm x 19mm
21mm x 22mm
3″ Extension
Blow mold case
Reviews
There are no reviews yet.