Titebond Original Wood Glue

Description

Titebond Original Wood Glue is the industry standard for woodworking. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sand ability and is unaffected by finishes. Original glue can help any woodworker achieve professional-looking results. It is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Easy to use, non-toxic and cleans up with water.

Features

Fast set – Shortens clamp time

Bonds stronger than wood

Solvent-resistant

Excellent sand ability

Unaffected by finishes

Easy cleanup with water

Fda approved for indirect food contact

Specifications

Conforms to ASTM D-4236

Units per package: 12

Packages per pallet

4 oz Bottle: 270

8 oz Bottle: 160

16 oz Bottle: 100

Application Guidelines

Application Temperature: Above 50°F

Open Assembly Time: 4-6 min (70°F./50%RH)

Total Assembly Time: 10-15 min (70°F./50%RH)

Minimum Required Spread: Approximately 6 mils or 250 sq. ft. per gal

Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush

Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess

Limitations: The Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use III Ultimate Wood Glue or II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. Keep From Freezing. Keep Out of the Reach of Children

Physical Properties

Type: Aliphatic resin emulsion

Calculated Voc: 10.7 g/L

State: Liquid

Weight per gal: 9.2 lb

Color: Yellow

Dried flim: Translucent

Flashpoint:> 200°F

Solids: 46%

Freeze/Thaw stability: Stable

Viscosity: 3,200 cps

PH: 4.0

Chalk temperature: To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application

Storage life: 24 months in tightly closed containers at 75°F

Bond Strength ASTM D-905 (On Hard Maple)

Room Temperature

Strength: 3,650 psi

Wood Failure: 68%

150°F. Overnight

Strength: 1,250 psi

Wood Failure: 1%

Caution Statement

Caution: Eye and skin irritant. Do not swallow. Do not allow eye contact or prolonged skin contact. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 min. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. Keep out of the reach of children