Warne HyperLite Scope Rings

Description

The Warne HyperLite Medium height 1″ scope rings are the ultimate lightweight optic mounting solution. Crafted from the exclusive MagnaFusion Alloy, these rings offer a staggering 35% weight reduction over traditional aluminum scope rings without compromising on strength or stability while providing an unbeatable foundation for your optic.

1″ Medium rings weigh 2.58 oz per pair

35% lighter than standard aluminum rings

Integrated recoil lug and dual-screw clamps maintain zero even under the harshest recoil

Precision CNC machined and topped with Cerakote to ensure flawless performance in any environment

Stang 4694 interface allows for better return to zero and rigidity

Fits both picatinny & weaver style bases, works best with full width cross slot mounts

Personalize you rifle with the special edition gray clamps for a unique contrast

MagnaFusion alloy

Return to zero

NATO/STANG

Cerakote finish

Lightweight

Designed and manufactured in the USA

Specifications

Fits Objective Size: 44mm

Height: Medium

Dimensions: 1″ x 0.400″ x 0.730″ x 0.900″

Finish Color: Matte Black

Material: MagnaFusion

Fits Objective Up To: 44mm

Scope Tube Diameter: 1″

Fits: Maxima/Weaver Bases and Picatinny Rails

Weight: 2.58 oz

Best Uses

Hunting

Target Shooting

LE/Military

Installation Instructions

Always verify that your firearm is Un-Loaded before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing.

To remove the scope, simply loosen the clamp scews on each ring and lift the scope off the mount, tilting slightly to the opposite side of the clamps. To re-mount the scope, simply place the rings into the slots the scope was originally mounted in, slide the rings and scope forward until the recoil lugs contact the front of the slot and tighten the clamp screws.

Remove all 4 cap screws and cap on each ring

Loosen both clamp screws on each ring and place in desired position on Maxima/Weaver style bases or picatinny rail

Push each ring towards muzzle to seat recoil keys and tighten clamp screws to 25 in-lb

Place scope in rings and reinstall cap screws, leave loose

With the scope still loose in the rings, adjust the scope for eye relief and correct orientation of the reticle

Torque spec are for dry threads, do not use thread-locker compound

Many scope manufacturers have established specific torque ratings for their scope and you must follow their recommended torque

Important

Never over tighten any base or ring screw. Never attach a scope if the objective touches the barrel or causes interference with the bolt, safety or cycling of the action. Always follow the firearm or scope manufacturers’ recommended torque specifications. You are responsible for your own gunsmithing methods.