Warne Ruger M77 Rings

Description

Ruger Model Specific fit sold in pairs, Maxima Ruger rings are packaged in model specific configurations to fit Ruger proprietary dovetail Warne’s Maxima rings are a solid steel, vertically split ring that handle even the most punishing recoil or large, heavy scopes. Since each firearm manufacturer has their own proprietary mounting rail design, each ring model must be machined to exacting tolerances for proper fit and function. Because of this, the Warne Ruger Rings are able to fit right onto the receiver dovetail with no need for a mounting base. The Ruger Fixed Rings are available the tapered receiver style like the Ruger M77, Hawkeye & Super Redhawk. The Ruger M77 style rings are packaged as two different heights to accommodate the tapered mounting surface on this firearm. Ruger Fixed Rings utilize 4 T-15 Torx style socket cap screws for secure and permanent optics mounting.

Permanently attaches to firearms dovetail

Ruger specific scalloped recoil control key for positive engagement of ring to receiver dovetail

Rings securely mount around scope using 4 Torx style T-15 socket cap screws

Vertical Split

Ruger Dovetail

Fixed

Sintered Steel

Return to Zero

Nato/ Stanag

Powder Coat Finish

Made in USA

Specifications

Size: 52mm

Height: Medium

Dimension A: 30mm

Dimension B: 0.460″

Dimension C: 0.705″

Finish Color: Matte Black

Material: Steel

Scope Tube Diameter: 30mm

Weight: 6.1 oz

Fits

Ruger M77

Uses

Hunting

Target Shooting

Installation Instructions

Always verify that your firearm is un-loaded before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing.

Remove the 4 screws from both rings

Place the scope in the ring halves and re-insert recoil key (CZ & Ruger rings do not have specific recoil keys and utilize an integrated recoil management system)

Start all 4 screws on both rings and tighten only the bottom screws to 25″ lb max

Place rings onto the bases with the recoil keys in the slots and push each ring towards the muzzle to seat the recoil key

Adjust eye relief and level the reticle and tighten only the bottom screws to 25″ lb max

Torque spec are for dry threads, do not use thread-locker compound

Important

Never over tighten any base or ring screw. Never attach a scope if the objective touches the barrel or causes interference with the bolt, safety or cycling of the action. Always follow the firearm or scope manufacturer recommended torque specifications. You are responsible for your own gunsmithing methods. If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes.